Sunday, April 12, 2009

Space Helmet: Trim, Straps, Etc.

I've done a lot of little things since the last post. The black trim is riveted onto the collar, the resin respirators have been cast, painted and mounted. I put trim around the nose area with a buried wire that has been shaped to fit better. I've attached the two side buckles holding the snout straps. I've added a snap fastener to the front of the collar to hold it in place. And I've antiqued the entire helmet, darkening it up and giving it more character. I am very happy with how it's turning out, and now await the result of the poll to see which accessories I will be adding.







Saturday, April 11, 2009

Pattern Drafting 101

The Spaceman Helmet
Above are several views of the collar that I wanted for the spaceman helmet. For the helmet itself I had the toy helmet to tape and pull a pattern from, but how do I come up with a pattern for the collar?

The illustrations above show the theory of attaching two flat pieces of leather together to form a three dimensional object. The silver objects are tubes which represent the helmet (or the crown of a hat). The gold objects represent the collar (or brim of a hat).
If we cut the collar in a donut shape with the inside hole having the same diameter as the tube, when attached the collar will be horizontal. If we cut the collar in a rectangle, when attached the collar will be vertical, ie. continue the lines of the tube.
Since the shape we want is somewhere in between these two extremes, we need to cut the collar in a large curve, as illustrated in the bottom drawing.

However, we don't want a collar that is uniformly angled down. Looking back at the first set of drawings we see that over the shoulders the angle needs to be closer to horizontal than vertical, whereas over the chest and back the angle needs to be closer to vertical than horizontal.
This final drawing shows the compromise made. Since the seams fall at the front and the back of the helmet wearer, the center of the pattern will be over the shoulders. And so, the middle is quite rounded (to make it more horizontal), while the two pattern ends are almost straight (to make them more vertical).

Friday, April 10, 2009

Space Helmet: Attaching the Collar

I have just cut out and sewn on the collar. Next I will cut out the collar trim to match the eye opening trim.

Monday, April 6, 2009

Space Helmet poll

Please take the poll. What story best suits the helmet as it looks so far. A space explorer as in "From the Earth to the Moon"; an underground explorer as in "Journey to the Center of the Earth"; a deep sea diver as in "20,000 Leagues Under the Sea"; or an emergency rescuer, as might be needed in a steampunk dystopia?

Your answers will help determine how I finish the helmet and the accompanying story. Thanks for participating! If you can't see the photograph of the helmet lower on the page you can see it here: helmet photograph.

Sunday, April 5, 2009

Space Helmet: The Eyehole Trim

I'm pretty much making up the design of this piece as I go along. When I found the helmet at the yard sale, I knew I wanted to copy the basic shape in leather, but beyond that I had no plans. Once I had stitched the leather pieces together and removed them from the helmet, I knew that I would have to reinforce all raw edges to keep it from being too floppy.



So today—besides antiquing the helmet and snout, and adding the required snaps—I made a trim piece to go around the eye opening. I gussied it up a bit to make it interesting, adding some cut outs, dyed it black and riveted it onto the helm. Sure enough, it reduces the flop factor.

When I add on the collar it should significantly help the helmet hold its shape.

Saturday, April 4, 2009

Space Helmet: Designing the mouth/nosepiece

When I tried on the plastic child's astronaut helmet, I could barely squeeze my head into it, and it touched my nose, so I decided early on to make a removable "snout" to give room for the nose, and to allow the wearer access to the mouth and nose without having to remove the helmet. Today I worked on designing that piece, working with green paper to figure out the patterns.


Once I was satisfied with the pattern I cut it out in leather, wet it and sewed it together with waxed thread. The snout will have two matching cold cast respirators on either side (where the two holes are), and one small something on the front. I have mostly built the respirator model out of acrylic sheet, and will mold it in rubber and cast it in resin.
The snout attaches to the helmet with four snaps on each corner, plus a buckle on each side (notice the protruding rivet where the buckle will attach on a short strap).

Next up will be making a visor which will completely cover the eye opening, and a collar to hold the helmet up off of the head, and to help keep its shape.


Monday, March 30, 2009

Space Helmet: It Ain't What it Seams

I have now cut and stitched together the four main parts of the helmet, and then shaped the wet leather over the yard sale plastic original. The toy astronaut helmet serves not only as a pattern source, but also as a shaping form. It reminds me of the underwater helmets worn by the crew of the Nautilus, with its roundedness.

At the end of yesterday's blog I decided that the plain exposed seam I had tried (and was planning for the entire helmet) wasn't the best choice, so I ripped out the one seam that I had done, and restitched it.

I replaced the side seams with overlapping seams, and for the center seam I chose a butt seam (since an overlapping seam has to favor one side or the other, and won't be symmetrical).
There are three different types of handsewn seams that I use in my leatherwork: Overlap, butt and plain. Below are the three types illustrated.

The plain seam can add structural strength and really emphasize the seam line, as can be seen on my firemaster's helmet. It is the historically traditional seam for firefighter's helmets, but it requires more effort to shape. On my steampunk gas mask you can see examples of the butt seam and the overlap seam.
Once the wet-formed helmet has dried, I will figure out the removable front piece that will cover the mouth, and also design a piece with a lense to cover the eyes.

Sunday, March 29, 2009

Designing a Steampunk Spaceman's Helmet

Today, Sunday, my wife and I went to some yard sales. Now sometimes you find nothing, and other times you find one gem. Just as we were about to leave one sale emptyhanded, I spotted a plastic astronaut's helmet. When I inquired about the price, the seller said $1--uh, 50¢--fearing I wouldn't cough up a whole dollar for this plastic helmet that was missing the visor. Of course, I saw much more in it. I knew I could pull a pattern off of it and remake it as a steampunk leather helmet!

Here is the plastic helmet as I bought it.

After thinking about how to break it up into separate leather pieces, I taped it all over with duct tape to make the patterns, and marked the divisions.

Here I've cut off the duct tape using an Xacto knife, and laid it down on heavy paper.


Next I've smoothed out the lines, removed the duct tape, and cut out the heavy paper patterns.



Next using the patterns I cut out the leather pieces, and punched the stitching holes, along with snap and buckle holes. I am leaving the front piece that covers the mouth removable so that the wearer can take it off for eating, etc.






Here I've stitched together the left center piece and the left side piece to see if it will work. I used a seam that exposes the edges, but after seeing it I think I'll remove the thread and do it over with an overlapping seam so that it will lie flat.
I will post more later as I progress on this project.



Flea Market Raygun Finds

Twas a beautiful Spring day, and I went to a local flea market searching for raygun components. Here is what I found.




From top to bottom: A toy cap pistol with good metal parts and a very crude wooden handle; a timing light, all shiney chrome; and an old water sprayer. With a little bit of fixing up and love, these can be made into rayguns. The top one will make a nice air pirate pistol, and the timing light will make a nice futuristic firearm.

Saturday, March 28, 2009

Five New Leather Masks

I have designed five new cut out masks for Spring 2009, and I'm selling them all at my Etsy shop for $10 off the regular price. I'm offering them all in several colors.
This is called cut out Fans in gold. It has a bit of an ancient Egyptian look to me.

This one is called cut out Hearts in red.

This one as you might guess is called cut out Stars in silver.


This one I've called cut out Totem, as it looks organic yet mystical to me at the same time.



And lastly, and this one is my current favorite, we have Muse, because it reminds me of ancient Greece.



Wednesday, March 18, 2009

Designing a New Leather Mask

Spring is almost upon us, and leather mask sales should pick up as buyers think about what they're going to wear at music festivals. Above is my first sketch of an idea for a new mask, consisting of a whole bunch of cut out hearts. I drew this right before turning out the lights for bed. The star means I think it's a good design.

This is the next sketch the following day, seeing how it would work to have the eye openings be larger hearts, with other hearts around it. In designing a mask, the eye openings are critical.
Here I have fleshed out the idea, and after penciling in all the hearts on one half of the face, I have inked them in. Next I scanned this image and brought it into Corel Draw, where I fine-tuned it and mirrored it for the other half of the face.




And here is the finished mask, after cutting out the pattern in leather, shaping it to my face form, and painting it red. Lastly, I've listed it the Cut Out Hearts mask on Etsy, where I hope it will quickly sell!

Sunday, March 15, 2009

Leather Wedding Photo Album

My son and daughter-in-law got married last Spring, and I finally finished a leather photo album for them. There is a baby coming this Summer, and I'm planning on making an album for him too. The floral design on the cover—as well as all the lettering—was laser engraved into vegetable tanned leather that I painted white for contrast.


White Rabbit Mask Makes it in the Pictures


Boudoir photographer Andrea Hausmann has purchased one of my white rabbit masks for use as a prop in her photographs. Hiding coquettishly behind the mask is burlesque cabaret showgirl Coco Framboise.

Wednesday, March 11, 2009

Custom Leather Mask for Rhymefest


I just finished a custom half-mask for Grammy Award winning hip-hop artist Che Smith, aka Rhymefest. His logo of a stylized R and F is in burgundy on a black background. Watch for him to wear it while he performs!

Tuesday, March 10, 2009

Raygun 66: Shaping the Grip

The grip model (black and white on the left) was molded and cast in resin (gray on the right). I wanted the top of the grip to be narrower than the bottom, so I bandsawed the casting right down the middle and sanded a bevel onto both halves. Then I glued the two parts together, and filled in the crack with Bondo™. I'm still trying to figure out what carved design I will inset into the sides of the grip.